This video covers the replacement of the bellow gasket and accessing, cleaning the filter on a Whirlpool front-load washer. The model dates from ~2013. Model WFW70HEB
Get yourself the spring expander below. Make this repair much easier.
Whirlpool, why don’t you make the filter accessible without removing the bellow gasket??.
The bellow replacement part came from AppliancePartsPro.com, part number W11106747
https://www.appliancepartspros.com/wh...
Spring expander
https://www.amazon.com/gp/product/B08...

Intro
0:44 Tools
1:50 Remove top
2:38 Remove detergent dispenser
2:50 Remove control panel
3:40 Remove spring-tension rim
4:29 Spring tension expander tool
6:10 Remove outer bellow gasket and detergent dispenser tube
6:45 Remove door lock mechanism
7:05 Remove panel’s lower nuts
7:50 Remove front panel top nuts
8:19 Loosen filter from rubber footings
9:38 Open filter and clean
10:50 Reseat filter in rubber footings
11:35 Loosen screw on tension rim on inner bellow gasket
13:23 Remove bellow gasket, clear
13:45 Seat new bellow gasket over outer rim
15:25 Reseat and tighten screw on tension rim
16:25 Push gasket flange over plastic and between metal tub
18:50 Check seal for proper positioning over plastic tub casing
19:52 Insert detergent dispenser tube through gasket hold
21:00 Reseat front door panel and tight nuts
21:55 Install door locking mechanism
23:05 Pull gasket over outer lip on front panel
24:00 Clamp spring-tension rim to top of gasket
24:45 Push spring into place and loosen tension on spring
26:09 Reattach co